Do you want to recover data from a Pendrive? Today, it is possible to make said device operational again, saving everything you thought you had lost. As you know, pen drives are helpful and very necessary instruments. In them, we store all types of digital elements very easily and quickly.
This tiny but valuable device has space to store much information. However, sometimes, they may be damaged and suffer errors due to different causes. For this reason, from इनसाइडरबिट्स, we will tell you how to recover data from a pen drive with extreme simplicity. Likewise, we will discuss some points of interest to avoid future errors.
Reasons why a pen drive is damaged
Before teaching you how to recover data from a Pendrive, we will explain the causes of why a drive becomes totally or partially corrupted. Let’s look at the most common ones:
- Abruptly ejecting the drive from the PC without using the “Safely Delete” option.
- Surprise system shutdown or other interruption when transferring information elements from the pen drive to another computer.
- If malware or documents are damaged, the data on the device will be inaccessible.
- Problems with firmware in USB storage systems and malfunctioning operating systems are decisive. These could damage and lose information elements.
These are the most common reasons. However, other causes can damage this type of instrument.
How do you identify if a storage unit is damaged?
Knowing how to identify the signs that show if a memory stick is defective is necessary. Otherwise, we would run the risk of trying to save information or believing we have stored it without realizing the error. It is precisely for this reason that we will immediately tell you some common signs:
- In case your component is damaged, the documents may disappear randomly.
- When opening a USB memory, the system may not recognize your repertoires.
- Report errors when inserting the USB flash drive, indicating, “Please insert a disk into drive XXX.” It might also suggest that you need to format it.
Remember these signs to know your unit is failing or has been completely damaged.
Is it possible to rescue items on a faulty USB storage device?
Extracting elements from a defective pendrive is possible. But before explaining how to do it, check that your device’s controls are current. Try connecting the drive to different USB ports or computers and see if you can access the documents.
If you can’t see any data, check the alternatives below. It will help you identify the proper procedure for repairing the damaged unit.
How to save a faulty USB memory?
We immediately indicate what process you must carry out to save a defective USB memory. To do this, you will see six instructions that we will address right now.
Procedure 1: Check for the presence of residue
As a starting point, check if your pen drive is connected correctly. If not, then try placing it in another USB port. If the error persists, you can plug the drive into another PC and see if it works.
If the port still does not identify the pen drive, check if there are small and foreign particles in the port or the pen drive. You can clean the dirt stuck there with a cotton swab.
Procedure 2: Assign a new letter
Generally, when a drive becomes damaged, it becomes unknown and inaccessible. To solve it, go to “Disk Manager,” which will allow you to set a new write. Below, we mention some methods for you to assign said letter:
- Right-click and select “Disk Management”.
- Right-click on the USB segment number in the “Disk Manager” section. Then click on “Change Drive Letter and Paths.”
- Choose the already assigned letter and click “Change.”
- Choose a drive letter from the drop-down list and set it to the faulty USB media.
- Try to access the pen drive from the search engine present in Windows.
Procedure 3: Update the equipment driver
Sometimes, old computer drivers can be why pen drives do not connect or deteriorate. So, for you to update the controls and repair the unit, below we mention some methods that will help you:
- To update device drivers, you must have Device Manager. You can achieve this by right-clicking on the “Start” button.
- When in the computer manager, click “Disk drives.” Then, you choose the unit and uninstall the device.
- Once the drivers have been uninstalled, you put the USB memory back in. Your computer’s new drivers will be updated automatically, and the unit will be recognized.
Procedure 4: Enable USB memory in the computer manager
Sometimes, pen drives can be deactivated automatically. This is due to driver installation errors. It is precisely for this reason that we will immediately tell you what to do so that you can recover data from a pen drive:
- Display the control panel, and click “Hardware and Sound” and “Device Manager.”
- Expand the list of disk elements.
- Double-click on the unit and then “Enable Device.”
- Click on “Next” to conclude.
Procedure 5: Repair of failures in the document segment of the USB storage system
As is well known, the document segment of a USB memory organizes the information elements and maintains a directory for carrying out various data transactions.
And whatever the failure is in the system, it can cause the USB memory to be damaged. It would cause the loss of the elements backed up there. In that sense, we will explain how to solve these errors on USB drives inserted in Windows 10 or 11.
- Go to “This PC,” right-click on the corrupt drive, and select “Properties.”
- Click the “औजार” window and the “Check” option.
- The Repairer automatically checks for document system failures, scans, and attempts to rescue damaged sections.
- Click on “Start” to start the scanning process. Please note that you will have to wait until the process is complete. After this, click on “Close”.
Important information
If your system runs on any older version of Windows, for example, Windows 7, you must act precisely. In this case, we suggest you carry out the actions that we indicate now:
- Right-click on the drive in front of your computer and click “Properties.”
- Click where it says “औजार” followed by “Rebuild”.
- When the scan starts, wait for it to complete and click “Close.”
- Finally, order “eject” as indicated by “Safely Remove” and connect it again.
Procedure 6: Restore documents from a faulty USB storage device using the system prompt
Correcting elements using the system sign is a quick and effective alternative to rescuing a corrupt drive. To achieve your goal, follow the above steps carefully to resolve errors and recover data from a faulty pen drive.
- In the box that says “Type here to search,” type “CMD” and click on the command prompt.
- In the “Command” tab, proceed to write or copy and paste “chkdsk F: /f.” Replace the letter F with the letter from your USB flash drive.
- Once the matter is concluded, eject your USB memory by clicking “Safely Remove” and connecting it again.
If you still cannot repair the defective pendrive after all this, then your last possibility is to format it. By doing so, all the data you have stored will be deleted, and this is not what we want.
So, if you have to do it, do it, as there is still hope of recovering data from a faulty pen drive. Of course, this is feasible if it is not overwritten with new elements.
Rescue items from a faulty USB flash drive with Remo Recover
As we indicated at the beginning, it is possible to recover data from a defective pen drive today. Just consider that you cannot access the internal content if the device is structurally damaged. This, of course, does not mean that the items stored there are damaged.
If you have already tried the method above, “chkdsk F: /f,” and have not had favorable results, this option is not feasible. Therefore, your chances are less, and your files will likely be corrupted.
From Insiderbits, we recommend using Remo Recover, an effective platform for saving items from a defective Pendrive. It allows you to rescue your documents quickly. We are discussing a tool designed with deep scanning technology that delivers even more data than you want.
The results will pleasantly surprise you. The best part is that you will not require as much time to complete this work. The average period for recovering data from a damaged pendrive is between 20 and 30 minutes.
Steps to follow to save information elements from a USB memory using Remo Recover
It is an effective and specialized platform with tools to recover data from a damaged pen drive. We are discussing a robust rescue algorithm that rescues information elements from a defective USB memory.
This platform has a score of 4.5 stars (according to Trustpilot), and you can download it for free on Windows and Mac computers. We will then teach you what steps to take to achieve your goal:
- Proceed to download, install, and activate Remo Recover, a platform that effectively facilitates data recovery from pen drives.
- Choose your defective pen drive and click on “Scan” to start the restitution process. If you can’t find your drive, click on the option “Can’t find the drive.”
- Immediately, the tool scans the removable drive to recover data from a damaged pen drive. It allows you to observe the rescued items even if the scan continues to circulate. Now click on “Dynamic Recovery View.”
- When the analysis is completed, you can follow and verify the recovered documents. To do this, double-click on the document you want to view.
- Navigate to the “Lost Partition” folder and choose “Files” to save what you want. Now click “Recover” and choose the space where you intend to save the rescued documents.
After the saving procedure, you can see the information elements recovered in the selected section. The scanning process’s duration may vary depending on the number of documents on your pen drive.
Your information elements are safe
The above methods can likely recover data from a damaged pen drive. However, take the necessary precautions to prevent information elements from being lost. On the other hand, Insiderbits invites you to learn how to do it.
